WALAPaper Laser Dark is a heat transfer paper that is made for laser printers which allows for easy at-home printing. It takes just minutes to design, print and create professional looking custom designs on garments.
Wash inside out in cold water. Use mild detergent. Do not use bleach. Dry on low.
Additional Instructions
STEP BY STEP INSTRUCTIONS:
Bring paper to room temperature before printing
Load transfer sheets into your printer so that the image is printed on the unlined (non-glossy) side.
Using your computer, select or design images to be transferred. DO NOT mirror or flip the image before printing.
Print image/design on paper using the following recommended print settings
Use scissors to cut around the transfer artwork to remove excess
Preheat heat press to 325°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
Press fabric for 3-5 seconds to release moisture and remove wrinkles
Peel liner from back of transfer
Place printed transfer onto the fabric with the printed side up and cover completely with parchment paper
Set to medium pressure
Press for 20 seconds
Remove parchment paper from transfer using a smooth, even motion
Recommended Print Settings:
HP
Media: Extra Heavy
OKI
Media: Heavy
RICOH
Media: Thick
CUTTING INSTRUCTIONS:
Use scissors to trim image/design from transfer sheet to remove excess area.
PRESSING INSTRUCTIONS:
Preheat press to 325 degrees
Press fabric for 3-5 seconds to release moisture and remove wrinkles
Place printed image face down on the garment (the lined side will be facing up)
Set at medium pressure for best results
Press for 20 seconds
HOT peel. Peel immediately for best results. Remove the backing paper from the transfer using a smooth, even motion while the transfer is still HOT.
WASHING INSTRUCTIONS:
Turn the garment inside out
Wash in COLD water
Use a mild detergent for best results
Do not use bleach or bleach alternative detergents
Remove the garment promptly from the washer (colors may bleed if left in the washer)
Dry on LOW temperature
ADDITIONAL NOTES:
Test results demonstrate better color retention after washing using hot peel method
When transferring several images to the same fabric, wait until all images are transferred before peeling the backing paper to prevent the heat from affecting already transferred images
Store unused transfer papers in a resealable polybag in a flat, cool, dry area