• 350°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
• 25 seconds
• Peel Hot or Cold
• Medium even pressure
• Print and cut right reading
• 100% Cotton, 100% Polyester, 50/50 Cotton/Poly Blend
• Wash inside out in cold water. Use mild detergent. Do not use bleach. Dry on low. 

Additional Instructions

STEP BY STEP INSTRUCTIONS:

1. Bring paper to room temperature before printing
2. Load transfer sheets into your printer so that the image is printed on the unlined (non-glossy) side. 
3. Using your computer, select or design images to be transferred. DO NOT mirror or flip the image before printing. 
4. Print image/design on paper using the following recommended print settings
5. Use scissors to cut around the transfer artwork to remove excess
6. Preheat heat press to 350°F for 100%-50% cotton blends or 275°F for fabrics less than 50% cotton
7. Press fabric for 3-5 seconds to release moisture and remove wrinkles
8. Peel liner from back of transfer
9. Place printed transfer onto the fabric with the printed side up and cover completely with parchment paper
10. Set to medium pressure
11. Press for 25 seconds
12. Remove parchment paper from transfer using a smooth, even motion

CUTTING INSTRUCTIONS:

Suggested Blade: 45 degree

Suggested Force: 40-75 grams

You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.

WASHING INSTRUCTIONS:

STORAGE INSTRUCTIONS:

Inkjet Dark has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.