WALAKut Reflective Permanent Vinyl
WALAKut Reflective Permanent Vinyl is a high gloss, reflective vinyl with a permanent pressure sensitive adhesive. It can be applied to flat or bumpy surfaces that you want to have a reflective look or design!
- Extreme UV exposure will shorten the life span of this material.
- 12" width
- White Reflective in color
- High Gloss
- For hard surfaces-flat or riveted
- 7 year outdoor durability
- Clear adhesive
- White liner
- Due to the manufacturing process, material may vary in width by 1/8-1/4"
- For Mask or Tape, click here
- Cut right reading
- Adheres to hard surfaces
Additional Instructions
- Cut image in right reading
- Weed material
- Squeegee transfer mask over image
- Remove the white backing (images will stick to the transfer mask)
- Squeegee images onto surface
- Remove transfer mask
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade: Fine-Point Blade (Standard)
