WALAKut Glow Puff Heat Transfer Vinyl 10"
WALAKut Puff Glow is a puff heat transfer vinyl that is easy to weed, easy to use, and has a vibrant glow! WALAKut Glow Puff HTV, the ultimate solution for adding a captivating glow to your designs! This innovative heat transfer vinyl combines the magic of glow-in-the-dark properties with a puffy texture, giving your creations a truly eye-catching and dimensional effect.
Glow-in-the-Dark with Puff Effect
WALAKut Glow Puff HTV offers a unique glow-in-the-dark effect. Its textured, raised puff finish adds dimension to your designs. This vinyl requires just one press to activate the puff effect. Perfect for attention-grabbing, custom creations.
Easy to Apply and Long-Lasting
Apply at 280°F with firm pressure for 8-10 seconds. Peel hot for a smooth, lasting result. The material is compatible with cotton, polyester, and blends. Wash inside-out with cold water for the best results.
- Actual width 9.75"
- Glow in the dark
- 125-170 microns thick
- Sticky liner
- Textured feel
- Raised puff finish
- Puffs with one press
- CPSIA certified for use on children's clothing
Also available from Heat Transfer Warehouse:
Other dimensional products
- 280°F
- 8-10 seconds
- Peel Hot
- Firm, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Cotton/Poly Blends
- Wash inside-out, cold water, gentle cycle, tumble dry low
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Additional Instructions
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 8 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 10
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
