ThermoFlex Plus 30" Heat Transfer Vinyl
ThermoFlex® Plus 30" heat transfer vinyl is a high-standard vinyl in the garment decoration industry. It offers a soft, matte finish and is available in a range of colors! Looking to use it in your wider cutters? ThermoFlex Plus HTV is offered in wider materials. The heat transfer vinyl is a polyurethane based material and durable. This ready-to-cut heat transfer vinyl can be cut with a laser cutting system, making it versatile. ThermoFlex Plus can be used in your Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 to the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000.
- Matte finish
- 100 microns thick
- Can be used with a Laser Cutter Quality, brand name heat transfer vinyl Soft hand, very flexible, & moves with the garment
- Polyurethane composition
- Durable and will outlast the life of the garment when applied properly
- Dye Migration may occur with low energy dyes in polyester and polyester blends
- Due to the manufacturing process, material may vary in width by 1/8-1/2"
- ThermoFlex 12"
- ThermoFlex 15"
- ThermoFlex 20"
- Accessories
- Heat Transfer Equipment
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
- 315-330° F
- 15 seconds
- Peel warm or cold.
- Medium even pressure
- Cut in reverse Cotton, linen, wool, lycra, spandex, polyester blends.
- NO nylon/ NO mesh
- Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.
Additional Instructions
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Frosty Clear - Dye Sub Instructions
320-380°F
15 seconds
Peel cold then cover with Teflon sheet and repress for 5 seconds Medium, even pressure
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
