ThermoFlex Light 15" is perfect for all your pre-cut letters and numbers for your sportswear! With a 20" width, you will be able to cut more and utilize all of your vinyl space. And since it has a static liner, it allows you to stack all your weeded designs and set aside until ready to use! It's similar to the ThermoFlex Plus line but it's thinner and does not have the sticky carrier.
- 315°-320° F
- 15 seconds
- Peel Warm
- Medium, even pressure
- Cut in reverse
- Cotton, Uncoated Polyester, Fabric Blends, Spandex, Lycra, Wool, Linen *NO NYLON
- Wash warm and tumble dry normal
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 23
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 4
Speed: 8
Force: 11
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: More Blade: Fine-Point Blade
