Custom Cutting SiserEasy Reflective HTV Transfers
Don't have a cutter? Don't have time to cut your HTV? No problem! Custom Cut Reflective HTV Transfers will save you the time of cutting and money of buying your own cutter! All you need is a heat press to apply. Submit your cut file and select the details needed and you will receive your very own custom cut HTV!
Artwork Details
Transfer Details
- 1 color transfers
- No minimums
- Transfers will arrive cut and weeded on a carrier sheet ready to be pressed
- Heat Transfer Warehouse is not responsible for mispressed transfers
Production Timeline
- An artist will reach out via email 1-2 business days after the order was placed.
- All orders must be approved before production starts.
- Production time is currently 1-2 business days before shipping.
- Large quantity orders may lead to extended production times.
- All orders will ship by customer's selection at check out. Examples : Ground, 2-Day Air, Next Day Air etc.
- All orders ship from our Fargo, ND location.
-
Recommended Products
Standard Reflective
- 305° F
- Preheat garment for 2-3 seconds then press for 15 seconds
- Peel Warm
- Medium-Firm even pressure
- Cut material in mirror image
- 100% Cotton, 100% Polyester, Poly/cotton blends, and test for Nylon
- Wait 24 hours before first wash then machine wash warm or cold with mild detergent. DO NOT use Bleach or Dry Clean. Recommend hang dry.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 19
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
