Siser's StripFlock Pro is a heat transfer vinyl that gives designs a suede textured look with a raised feel. With the wide variety of color options and the ability to layer, this product will give you the unique look, you desire! Just like the classic version, StripFlock® Pro can also be layered on top of itself, for even more dramatic effects!
- 311° F
- 10 - 15 seconds with 10 second re press if design lifts after initial press
- Peel Warm
- Medium pressure
- Cut in reverse
- 100% cotton, 100% polyester, Poly/cotton blends, leather
- Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Additional Instructions
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Gram Force: 10
2. Speed: 30 cm/s
3. Tool: CB09U+0
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Flocked
Blade: 4
Speed: 5
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
Cut Settings for Roland GS/GX-24:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Blade: 45 degree
Gram Force: 80-120
Offset: .250
Speed: 30 cm/s
Cut Settings for Scan N Cut:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Blade: Standard, 4
Cut Speed: 1 Cut
Pressure: 2
Cut Settings for Titan:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Blade: 45 degree / 60 degree
Gram Force: 100-110
Speed: 180 mm/s
