• 250° - 300°F
• Preheat garment for 5 seconds; press transfer for 5 seconds
• Hot Medium
• Cut right reading
• Adheres to Cotton, Polyester, and Cotton/Poly Blend
• Wash inside out using cold water. Tumble dry low heat. NO bleach. No fabric softener.

Additional Instructions

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16 (recommend a test cut first)

*HTW uses a 45 Degree Blade