Siser Hi-5 Matte Printable HTV
Siser Hi-5 Print Matte is Siser's newest printable! It is designed for low-heat application which prevents scorch marks and discoloration when pressing your garments! Siser Hi-5 Print Matte is compatible with Solvent, Eco-Solvent and Latex inks. It will adhere to most fabrics like 100% Polyester, 100% Cotton and Poly/Cotton blends.
Printer Compatibility
- Not for desktop printers
- Solvent, Eco-Solvent and HP Latex inks
- Not compatible with inkjet, toner or sublimation printers.
Product Details
- Due to the manufacturing process, material may vary in width by 1/2-1"
- 85 microns thick
- Matte Finish
- Static, Non-sticky liner
- Incredible stretch and rebound
- Thin, soft hand
- Use as a top layer
- CPSIA Certified
- Composition: PU
Material Applications
- Cotton
- 100% Polyester
- Cotton/Poly Blends
- Rayon
- Polypropylene
Recommended Mask/Transfer Type
20" Pricing:
10 yd roll = $76.64
25 yd roll = $178.34
50 yd roll = $346.79
30" Pricing:
10 yd roll = $110.62
25 yd roll = $265.59
50 yd roll = $503.99
DROP SHIP product; this material will be sent via ground shipping from Siser and will ship separately from your order.
- 250° - 300°F
- Preheat garment for 5 seconds; press transfer for 5 seconds
- Hot Medium
- Cut right reading
- Adheres to Cotton, Polyester, and Cotton/Poly Blend
- Wash inside out using cold water. Tumble dry low heat. NO bleach. No fabric softener.
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16 (recommend a test cut first)
*HTW uses a 45 Degree Blade
