Siser EasyWeed Stretch Heat Transfer Vinyl
Siser EasyWeed Stretch 12 inch, 15 inch and 20 inch are the top standard vinyl for your performance wear! Siser EasyWeed Stretch delivers the stretch that you need along with all the EasyWeed qualities it has. It's the thinnest vinyl line from Siser at 85 microns thin and applies flawlessly on those cotton and poly blend garments. Siser EasyWeed Stretch has an ultra-matte finish with a soft hand feel available in a wide range of colors. Use Siser EasyWeed Stretch for your ideal performance apparel, it will become a favorite for all garment decorating due to the soft hand feel and its weightlessness! It's CPSIA Certified which allows it to be safely used for any age garments along with those tougher material like spandex and Lycra.
- 320° F
- Pre-press for 2-3 seconds, then 20 seconds with transfer
- Peel Hot or Cold
- Firm even pressure
- Cut in reverse
- 100% uncoated polyester, poly/cotton blends, 100% cotton, lycra, spandex, and leather
- Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener. Dry at normal setting.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16-19 (recommend a test cut first)
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point
Blade (Standard)
Siser EasyWeed Pantone Color Chart
For additional guidance on how to apply pressure correctly, please refer to this article:
https://www.siserna.com/proper-pressure-htv/
