Siser EasyPSV® Starling™ 12"
Siser and Avery Dennison have joined forces to create the new EasyPSV Starling! This is the successor to our EasyPSV Permanent line and improved in almost every way! EasyPSV Starling is now easier to cut and weed than ever before. Achieving intricate details is a easier than ever, and you don't need to worry about losing those tiny letters and shapes. Possibly the biggest change is that EasyPSV Starling is dishwasher safe— up to 80 washes! Yes, this means you can apply designs onto drinkware and run them through the dishwasher time and time again without worrying about peeling! By popular demand, most EasyPSV Starling colors are now available in a matte finish, with select colors available in a gloss finish. There is a new backing with a joint Siser/Avery Dennison logo that will help differentiate EasyPSV Starling from the previous version. EasyPSV Starling is a PVC-based material and is not CPSIA certified.
- Width: 12"
- Composition: Calendered PVC
- Thickness: 76 Microns/3.0 Mils
- Finish: Matte + Gloss
- Adhesive: Permanent
- Applies to: Wood, Glass, Plastic, Ceramic, Metal, Drinkware
- Grid Backing: Gray
- Rated Durability: 3–5 Years
- Dishwasher Safe: Yes- on the top rack
- Dishwasher Cycles: Up to 80
- Microwave Safe: No
- Not recommended for use near flame/heat source. Not recommended with microwave or painted drywall.
- Outdoor Performance: UV, temperature, humidity, and salt water resistant
- Siser EasyPSV Application Tape
12" Pricing:
Sheet= $1.25
1 yd= $3.25
5 yd= $13.00
10 yd= $24.00
25 yd= $50.00
50 yd= $90.00
- Use SiserPSV Application Tape Cut right reading Adheres to hard surfaces
- Cut image in right reading
- Weed material
- Squeegee transfer mask over image
- Remove the white backing (images will stick to the transfer mask)
- Squeegee images onto surface
- Remove transfer mask
- Place EasyPSV Starling with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
- Weed the excess vinyl
- Remove the application tape's paper liner. Place the tape on top of EasyPSV Starling and burnish with a squeegee
- Lift the application tape and EasyPSV Starling away from the paper liner to expose the removable adhesive.
- Place the application tape with you design on your desired object.
- Burnish with a squeegee to full adhere the design.
- Gently peel the application tape, leaving jsut you EasyPSV Starling design on the object.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16 *HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade: Fine-Point Blade (Standard)
