Siser Puff Heat Transfer Vinyl 20"
Ready to raise your designs to the next level? As the name implies, Siser Easy Puff is a unique HTV that “puffs” up from the garment when heat is applied, transforming designs into a textured 3D look. Easy Puff provides a bold style that’s perfect for lettering and other large designs that can highlight the elevated effect. With a pressure-sensitive carrier and low application temperature, Easy Puff truly lives up to its name!
- 140 microns thick
- Due to the manufacturing process, material may vary in width by 1/4-1/2"
- Sticky liner
- Textured feel
- Raised puff finish
- It is recommended to apply Easy Puff last when used with other materials.
- Puffs with one press. Repeated applications will “flatten” the puff effect permanently.
- Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.
- CPSIA certified for use on children's clothing
- Accessories
- WALAKut Puff Plus
- WALAPresses
- WALAKut HTV
- Heat Transfer Equipment
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Other 3 Dimensional Vinyl
CUT SHINY SIDE UP
- 280°F
- 8-10 seconds
- Peel Hot
- Firm, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Cotton/Poly Blends
- Wash inside-out, cold water, gentle cycle, tumble dry low
Additional Instructions
CUT SHINY SIDE UP
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 8 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 10
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
