Siser Easy Puff 12" Metallic HTV
Elevate your puffy designs to new heights with Easy Puff 12" Metallic! Experience the familiar and beloved puffy effect found in our standard Easy Puff line, now enhanced with a sleek, shiny finish. Easy Puff Metallic introduces a striking style that is ideal for lettering and other large designs
that can highlight the elevated effect. With a pressure-sensitive carrier, low application temperature, and eye-catching sheen, Easy Puff Metallic truly lives up to its name!
Important Application Notes:
Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press
application process. After the first press, the carrier must be peeled hot and the design
should be covered with a cover sheet, then pressed a second time to activate the puff effect.
- 280° F
- 8 - 10 seconds, peel carrier, cover with a cover sheet, press again for 8-10 seconds
- Peel Hot
- Medium pressure
- Cut in reverse.
- Applies to 100% cotton, 100% polyester, poly/cotton blends
- Wait 24 hours before first wash. Wash inside-out, machine wash cold and use mild detergent. Tumble dry low. Do not bleach or dry clean.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 8 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 10
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
Pricing:
5 yd roll = $41.99
10 yd roll = $79.99
25 yd roll = $179.99
50 yd roll = $339.99
