Siser ColorPrint Aurora
Are you looking to enhance the color-shifting effect of Aurora? Look no further than ColorPrint Aurora, a printable heat transfer vinyl (HTV) that features a remarkable iridescent finish. This HTV is designed to work seamlessly with large-format printing systems, making it perfect for creating truly distinctive full-color designs. ColorPrint Aurora shares the same color-changing properties as our Aurora line and is capable of shifting hues when viewed from different angles. Additionally, its woven fabric texture adds a new dimension of visual and tactile appeal to your designs.
Printer Compatibility
- Not for desktop printers
- Solvent, Eco-Solvent and UV inks
- Rolled materials to be used with wide format printers such as Roland, Mimaki, Mutoh, HP and Epson
- Not compatible with inkjet, toner or sublimation printers.
Product Details
- Due to the manufacturing process, material may vary in width by 1/8-1/4"
- 170 microns/6.69 Mils Thick
- Iridescent Finish
- CPSIA Certified
- Composition: PU
Material Applications
- Cotton
- Polyester
- Cotton/Poly Blends
- No nylon
Recommended Mask/Transfer Type
Pricing:
20"
5yd =$60.00
10yd = $110.00
25yd = $249.99
29.5"
5yd =$89.99
10yd = $159.99
25yd = $369.99
59"
25yd = $699.99
- 305° F
- 15 seconds
- Peel warm
- Medium pressure
- Cut right reading
- Polyester, cotton, poly/cotton blends
- Wait 24 hours before first wash. Machine wash cold with mild detergent. DO NOT dry clean. NO bleach or fabric softener. Wash inside-out for best results
Additional Instructions
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: .250
2. Speed: 30-50 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 5
Speed: 4
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl+
Default Blade: AutoBlade
