• 305°F
• Preheat garment for 2-3 seconds, then apply design for 10-15 seconds
• Peel Cold
• Medium to firm, even pressure
• Cut in reverse
• 100% cotton, Poly/cotton blends, 100% polyester, Leather
• Wait 24 hours before 1st wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000: 

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 20

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

1. Smooth Heat Transfer Material Setting

2. Blade at a 2

3. Speed at 8,

Pressure at 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More

Blade: Fine-Point Blade (Standard)