TURBO PRINT 4038 H2O is a heat-sealable, printable and water-based PU textile transfer film. TURBO PRINT 4038 H2O is compatible with all current printers using ECO-solvent and solvent inks. TURBO PRINT 4038 H2O offers a high print resolution with a matte finish and has a pleasant soft textile touch. TURBO PRINT 4038 H2O offers excellent washing-resistance

• NOT FOR DESKTOP PRINTERS
• Self-adhesive PET liner
• Available in 30 yard rolls
• Matte Finish
• 90 microns thick 
• Opaque White
• Great for heat sensitive products
• Suitable for light and dark textiles
• Suitable for low-temperature application
• Compatible with solvent and eco-solvent printers
• Applies to Cotton, Polyester, Uncoated Nylon, Mixtures of Polyester/ Cotton and Polyester/ Acrylic
• For application to Nylon that is treated with any kind of coating, please test for suitability
• Printing Profiles
• Transfer Mask

• See below for temperature on different garments
• See below for time on different garments
• Peel Warm
• Medium, even pressure
• Cut and print your design right reading
• Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic
• Wash inside out. Tumble dry.

Additional Instructions

Temp      Time

265°F :  5 seconds 

300°F:   4 seconds

320°F:   3 seconds

For NYLON
Press at 300°F.

Preheat garment for 5 seconds. Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds. 

Additional Instructions 

• Print and cut your design right reading
• Remove from printer and wait for inks to completely dry
• Weed away excess material
• Press your design at one of the temps and times listed above
• Peel warm 

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.