Perforated Glitter 20" Heat Transfer Warehouse
High-quality glitter with a textured feel Glitter can be layered as top level or inlay (shown) Use in place of a polka-dot pattern or create eye-catching negative space on a solid garment or accessory Approximately 325 Microns/12.8 Mils thick Note: Material may peel back from the liner. In that case, we recommend smoothing it down, if needed, prior to cutting
20" Pricing:
5 yd roll = $65.00
10 yd roll = $127.00
25 yd roll = $310.00
54 yd roll = $590.00
GROUND ONLY shipping; will make your entire order ship 2-5 day ground.
DROP SHIP product; this material will be sent via ground shipping from Specialty and will ship separately from your order.
- 330°F
- 15 seconds
- Peel hot or cold
- Medium to firm pressure
- Cut mirror image
- Cotton, polyester, fabric blends
- Wash warm, tumble dry normal
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 23
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Flocked
Blade: 4
Speed: 8
Force: 14
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: More
Blade: Fine-Point Blade (Standard)
- Perforated Glitter PDF Instructions
