• Cut right reading
• Adheres to hard surfaces
• Additional Instructions
• Cut image in right reading
• Weed material
• Squeegee transfer mask over image
• Remove the white backing (images will stick to the transfer mask)
• Squeegee images onto surface
• Remove transfer mask *651 is asel-adhesive material.
• It creates an excellent bond with just about aby clean, smooth, and waterproof surface which is free of grease, wax, or silicone.

  Cut Settings for Graphtec CE6000:

  Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

  1. Offset: 0

  2. Speed: 25 cm/s

  3. Acceleration: 4

  4. Cut Force: 16 *HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 1

Speed: 3

Force: 4

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Vinyl

Pressure: Default

Blade: Fine-Point Blade (Standard)