- Cut right reading
- Adheres to hard surfaces
- Additional Instructions
- Cut image in right reading
- Weed material
- Squeegee transfer mask over image
- Remove the white backing (images will stick to the transfer mask)
- Squeegee images onto surface
- Remove transfer mask *651 is asel-adhesive material.
- It creates an excellent bond with just about aby clean, smooth, and waterproof surface which is free of grease, wax, or silicone.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16 *HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 1
Speed: 3
Force: 4
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Vinyl
Pressure: Default
Blade: Fine-Point Blade (Standard)