Marble HTV Patterns for Shirts and Garments
- This product requires mask. KTM Mask or 850 Mask
- If you choose the KTM Mask Option you will receive a 1 yd roll of KTM if you order a 1 yard roll of pattern or will receive a 5 yd roll of KTM if you order a 5 yard roll of pattern.
- 11" printed workable space
- Matte finish
- We recommend if you use this product in a layered design to us this product as the top layer only.
- If ordering this product it may delay your standard shipping times depending on order value and time order was placed
- Please see our shipping policies
- May delay your order 1-3 business days; depending on the time the order is placed and the quantity.
- This is a Fargo only item, your entire order will ship from Fargo. Transit times may vary.
- This is a non-returnable product
- Colors are subject to change without notice
- Accessories
- Fashion Sign Vinyl Prints
- Cotton, Polyester, and 50/50: 266°F | Nylon: 302°F
- Cotton, Polyester, and 50/50: 5 seconds Nylon: Preheat for 5 seconds and press for 5 seconds. remove liner and cover with a teflon sheet and press for another 10 seconds
- Peel warm
- Medium, even pressure
- Cut right reading
- Cotton, Polyester, Uncoated Nylon, 50/50 blends
- Wash inside out. Tumble dry.
Additional Instructions
Cut your design right reading
Weed away excess material
Mask your design with a recommended mask
Remove the liner of the mask
Press your design at one of the temps and times listed above
Peel warm
CUT SETTINGS
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat
1 yd (without KTM Mask):
1-2 rolls= $11.00 per roll
3-4 rolls = $10.45 per roll
5-9 rolls = $10.23 per roll
10+ rolls = $9.90 per roll
1 yd (with KTM Mask):
1-2 rolls= $14.60 per roll
3-4 rolls = $13.87 per roll
5-9 rolls = $13.58 per roll
10+ rolls = $13.14 per roll
5 yd (without KTM Mask):
1-2 rolls= $45.00 per roll
3-4 rolls = $42.75 per roll
5-9 rolls = $41.85 per roll
10+ rolls = $40.50 per roll
5 yd (with KTM Mask):
1-2 rolls= $58.70 per roll
3-4 rolls = $55.77 per roll
5-9 rolls = $54.59 per roll
10+ rolls = $52.83 per roll
All your favorite patterns on our low temp heat transfer vinyl! Easy to
cut weed and applies to multiple garment types.
Product Details
- 11" printed workable space
-
.4-.5" white space on either side of the pattern, please see image for
clarification. This does not effect your print. Each pattern is printed 11" x 36"
or 11" x 180"
- Self Adhesive Liner
- 100 Microns
- Matte finish
- Composition: PU
-
This product requires a heat transfer mask: KTM Mask
- Colors are subject to change without notice.
Production Timeline
- All patterns are printed on demand.
-
May delay your order 1-3 business days; depending on the time the order
is placed and the quantity.
-
This is a Fargo only item, your entire order will ship from Fargo.
Transit times may vary. Please see our shipping policies for further
details.
How to use our printed patterns
- Load the the vinyl pattern side UP in your cutter
- Cut your design right reading, do NOT mirror
- Weed away excess
-
Apply your heat transfer mask of choice
-
Please note a heat transfer mask is required for this material to
work properly
- Squeegee your mask onto your design, smooth it out
-
Flip your design over so the pattern is not on the table and the liner
is facing up
- Remove the liner from the material.
- Cotton, Polyester, and 50/50: 266°F | Nylon: 302°F
-
Cotton, Polyester, and 50/50: 5 seconds Nylon: Preheat for 5 seconds
and press for 5 seconds. remove liner and cover with a teflon sheet
and press for another 10 seconds
- Peel warm
- Medium, even pressure
- Cut right reading
- Cotton, Polyester, Uncoated Nylon, 50/50 blends
- Wash inside out. Tumble dry.
Additional Instructions
Cut your design right reading
Weed away excess material
Mask
your design with a recommended mask
Remove the liner of the mask
Press
your design at one of the temps and times listed above
Peel warm
CUT SETTINGS
Cut Settings for Graphtec CE6000:
Settings
can alter for each cutter and how dull or sharp the blade is. Test
Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3.
Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses
a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can
alter on how dull or sharp the blade is. Test Cutting is Recommended.
1.
Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed
at 5, Pressure at 6
4. Double Cut/Cut on Mat
