• 350°F
• 30 seconds
• Peel cold
• Medium, even pressure
• Print paper right reading, then remove from mounting paper
• Wait 24 hours before first wash. Wash inside out in cold water using a mild detergent. See full instructions below.

Additional Instructions

PRINTING

DO NOT mirror your image or artwork Use single sheet feeding and "heavy paper" settings to ensure fusing of the toners

Print the image on the coated side of the transfer paper (NOT the side with text)

Feed paper into the printer/ copier with the short dimension first (gain long)

For best results, trim away unprinted areas of the transfer

Recommendations:

Choose garments that have a tight weave and using an image with rounded corners to avoid corner lift-off after washing

TRANSFERRING

Heat press at 350° F 

Medium pressure Press 30 seconds

DO NOT pre-press Slowly remove backing paper (printed paper) from image transfer

Place the heat transfer with the image facing upwards in the desired position on the fabric

Cover the imaged transfer with a cover sheet

Allow cover sheet to cool completely before removing from the garment

WASHING INSTRUCTIONS

Leave finished item for at least 24 hours before washing

Turn garment inside out and wash in cold water using a mild detergent

Do not use bleach.

Dry on low heat setting.

Do not dry clean.

Do not iron directly on the transferred area

• Neenah Dark Laser 1 Opaque PDF Instructions