Only 100 % cotton and wash warm cycle with no fabric softeners.
Additional Instructions
Print Settings
Image Mode: Mirrored
Media Setting for OKI 7411/711/9420/920/9541/941:Multi-Purpose-Tray, Labels 1
Media Setting for OKI Pro8432WT: Multi-Purpose-Tray, User Type 2
White Toner: On
Tranfer Process Cotton
Place the transfer on your textile
Press by using the settings from the table below
Rub the trnasfer with a piece of cloth for 5-10 seconds, then remove the paper slowly
Cover the transfer with a sheet of silicone paper
Fix the transfer by using the settings from the table below
Transfer Process Cardboard/Paper
Place the transfer on your cardboard or paper
Press at 180°C for 15 seconds with 2-3 bar medium pressure
Remove the paper after 5-10 seconds
Tips & Tricks
Place the textile completely flat onto the lower plate. (Please make sure the collar, creases or bumps are not on the lower plate. If this is not possible, slide your textile over the lower plate).
If you see a light background around your transfer after the transfer process, reduce the pressure slightly to minimize or to eliminate the background completely. If the toner is not transferred completely, increase the pressure slightly to achieve a complete transfer.
Because there are so many different heat presses on the market and even heat presses of the same brand can differentiate in the actual heat and pressure applied to the garment, it is essential that you setup your own transfer application parameters on your heat press. Depending on the heat and the pressure of your heat press, the transfer time can be between 10 to 15 seconds more.
For optimal washability please keep the recommended pressure, the temperature or the time of the fixing application.
The Clam-shell presses usually have less pressure, that’s why it is necessary to increase the press time.
Wash and Care Instructions
Up to 30°C (cold wash cycle). Inside out. Do not use fabric softener or liquid detergent
Do not tumble dry! Hang dry or line dry recommended
