Football HTV Patterns
$11.00
Cut your design right reading
Weed away excess material
Mask your design with a recommended mask
Remove the liner of the mask
Press your design at one of the temps and times listed above
Peel warm
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat
1 yd (without KTM Mask):
1-2 rolls= $11.00 per roll
3-4 rolls = $10.45 per roll
5-9 rolls = $10.23 per roll
10+ rolls = $9.90 per roll
1 yd (with KTM Mask):
1-2 rolls= $14.60 per roll
3-4 rolls = $13.87 per roll
5-9 rolls = $13.58 per roll
10+ rolls = $13.14 per roll
5 yd (without KTM Mask):
1-2 rolls= $45.00 per roll
3-4 rolls = $42.75 per roll
5-9 rolls = $41.85 per roll
10+ rolls = $40.50 per roll
5 yd (with KTM Mask):
1-2 rolls= $58.70 per roll
3-4 rolls = $55.77 per roll
5-9 rolls = $54.59 per roll
10+ rolls = $52.83 per roll
All your favorite patterns on our low temp heat transfer vinyl! Easy to cut weed and applies to multiple garment types.
Product Details
Production Timeline
How to use our printed patterns
Cut your design right reading
Weed away excess material
Mask
your design with a recommended mask
Remove the liner of the mask
Press
your design at one of the temps and times listed above
Peel warm
Cut Settings for Graphtec CE6000:
Settings
can alter for each cutter and how dull or sharp the blade is. Test
Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3.
Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses
a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can
alter on how dull or sharp the blade is. Test Cutting is Recommended.
1.
Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed
at 5, Pressure at 6
4. Double Cut/Cut on Mat
