• 300 - 320F
• 15 - 20 seconds Cold Medium, even pressure
• Cut in reverse
• Peel Cold
• Cotton, polyester, acrylic, and similar fabrics
• Allow 24 hours after application before washing. Wash inside out. Do NOT bleach. Tumble dry or dry clean approved.

Additional Instructions

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Flocked

Blade: 4

Speed: 8

Force: 11

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: More

Blade: Fine-Point Blade (Standard)

• Galaxy Stretchable Glitter PDF Instructions