Siser Holographic Heat Transfer Vinyl
Create depth and dimension with Siser Holographic heat transfer vinyl! They contain color changing chips that take your designs to a whole new level with many special effect colors and finishes. It can also be used to create a faux rhinestone look!
- 320°F
- 15-20 seconds
- Peel cold
- Medium, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Poly/cotton blends, Leather
- Wait 24 hours before first wash. Wash on cold to warm water with mild detergent. Dry on normal. Do not dry clean.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 25
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 14
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Light Cardstock
Pressure: Default
Blade: Fine-Point Blade (Standard)
