DecoFilm Soft Metallics Colors HTV
DecoFilm Soft Metallics offers a smooth and soft metallic finish to your designs! These patterns and finishes are stretchy and durable which is great to be applied to a wide range of garment types. DecoFilm Soft Metallics has a soft hand feel and when it is heat applied, it will take on the texture of the garment. This line offers that extra pop and a brilliant accent of precious metals.
- 20" width
- Offers a smooth and soft metallic finish
- Can be layered as top level or inlay
- 3 mils/75 microns
- Stretchable film
- Very durable
- Add value to any design
- Easy cutting film for all styles of plotters
- Any colors marked with a * means it will be drop shipped from the vendor
- Test before doing high runs of Dazzle cloth or shiny polyester fabrics
- Accessories
- Heat Transfer Equipment
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
- 302°F - 320°F
- 7-8 seconds
- Peel Cold - Repress with Teflon for 3-5 seconds
- Medium pressure
- Cut in Mirror Image Cotton, Uncoated Polyester, Fabric Blends, Poly/Acrylic
- ** NO NYLON
- Wash Inside Out, Gentle Cycle, Cold Water, Tumble Dry Low. Suitable for Dry-Cleaning.
Additional Instructions
Deco-Film Soft Metallics Colors PDF Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 18
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 7
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
