• 300° F-320° F
• 10 - 15 seconds
• Peel warm
• Medium pressure
• Cut in reverse
• Cotton, uncoated polyester, fabric blends, wool, linen
• Wash inside out, gentle cycle, cool/warm water, line or air dry.

Additional Instructions

Sublimation Instructions:

*Paper heat setting may differ*

Heat sublimation on top of already pressed vinyl

Press at 390° F F for 30 seconds  

Application instructions

for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test cutting is recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 23

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 14  

• DecoFilm Brilliant Chameleon