- See below for temperature on different garments
- See below for time on different garments
- Peel warm Medium, even pressure
- Cut your design right reading
- Cotton, Polyester, Uncoated Nylon, 50/50 blends
- Wash inside out. Tumble dry.
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Additional Instructions
For Cotton, Polyester, 50/50 blends
Temp Time
266° F : 5 seconds
302° F: 4 seconds
320° F: 3 seconds
For NYLON
Press at 302° F
Preheat garment for 5 seconds.
Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.
Additional Instructions
Print and cut your design right reading
Weed away excess material
Press your design at one of the temps and times listed above
Peel warm
CUT SETTINGS
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 1
3. Speed at 5, Pressure at 6
4. Double Cut/Cut on Mat Digital Patterns
