Solvent Silver Gloss Printable Heat Transfer Vinyl
Printer Compatibility
- Not for desktop computers
- Solvent, Eco-Solvent, UV and latex* printers
- *If using on a latex printer, never heat above 100°C on the printer settings
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Product Details
- Due to the manufacturing process, material may vary in width by an 1/8" – 1/4"
- 70 microns thick
- Glossy & silver metallic finish
- Stretchable, Soft hand
- Contains dye blockers to prevent dye migration
Material Applications
- Applies to nylon, lycra, and spandex
- No nylon
Recommended Mask / Transfer Type
- 275°F
- 15-20 seconds
- Peel warm, almost hot
- Hard, even pressure
- Cut in normal direction
- Cotton, uncoated polyester, fabric blends, spandex, lycra, wool, linen
- Follow wash instructions for nylon, turn inside out, cold water, tumble dry low
Additional Instructions
Test on Nylon, Dazzle Cloth, and Shiny Polyester
Tip for applying to moisture-wicking materials:
Damp a cloth with rubbing alcohol, then rub it into the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow better adhesion to the garment.
- CPS-2168 Solvent Silver Gloss PDF Instructions
