Turbo 4036 Printable Heat Transfer Vinyl for Full Color Designs
is a great printable vinyl that works with both light and dark garments with a matte finish. The low-temperature application vinyl is great for all presses and works on a wide range of garments!
Matte Finish for Light and Dark Garments
Turbo 4036 delivers crisp full-color designs on cotton, polyester, blends, and uncoated nylon. Its low-temp press range makes it compatible with most garments and heat presses.
Printer Compatibility
- NOT FOR DESKTOP PRINTERS
- Compatible with: Eco-Solvent, Solvent, and Latex Inks
-
Need help with your artwork? Check out our Artwork and Mockup Resources.
Product Details
- Material may vary in width by ¼” - ½”
- 100 microns thick
- Matte Finish
- Self Adhesive Liner
- PU textile transfer vinyl
Material Applications
- Cotton
- Polyester
- Cotton/Poly Blends
- Uncoated Nylon
Recommended Mask/Transfer Type
- See below for temperature on different garments
- See below for time on different garments
- Low even pressure
- Medium, even pressure
- Cut and print your design, right reading
- Cotton, Polyester, Uncoated Nylon, Mixtures of polyester/cotton and polyester/acrylic
- Wash inside out, gentle cycle, cold water and tumble dry.
Additional Instructions
Temp Time
266°F : 5 seconds
302°F : 4 seconds
320°F : 3 seconds
Cotton, Polyester & Cotton/Polyester Blends
- 270°F.
- 45 blade is recommended
- Press once for 5 seconds
- Print and cut your design right reading
- Remove from printer and wait for inks to completely dry
- Weed away excess material
- Medium even pressure
- Peel warm
Uncoated Nylon
- 302°F
- 45 blade is recommended
- Preheat garment for 5 seconds.
- Press for 5 seconds then remove liner and cover transfer with a teflon sheet and press for another 10 seconds.
- Print and cut your design right reading
- Remove from printer and wait for inks to completely dry
- Weed away excess material
- Low even pressure
- Peel warm
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
